VocoPro CDG-600RF Owner's Manual page 15

Controls and Functions of The Remote Control
MEMORY
8
4
STOP
7
13
OPEN/CLOSE
1
DISPLAY
2
REPEAT
3
SKIP/SEARCH
5
PLAY/PAUSE
6
1. OPEN/CLOSE: The OPEN/CLOSE button on the hand
held remote control operates the CD/CDG tray. Press
once to open the CDG tray and again to close the tray.
2. DISPLAY: The display button when pressed once will
show the user the remaining number of played-played
song selections on the CD/CDG disc and the amount of
time left to play them. It serves the same function as the
"DISPLAY" button on the front panel of the CDG-600RF.
(See PARTS AND FUNCTIONS, #5)
3. REPEAT: The REPEAT button on the hand held remote
control allows the user to repeat one song selection or all
song selections. (See PARTS AND FUNCTIONS,
FRONT PANEL diagram, #6)
4. SKIP: The SKIP button on the hand held remote control
allows the user to "skip" back to the previous song.
When a song is playing, it serves as a "rewind" button
and will "SCAN" the song selection in reverse. On the
front panel of the CDG-600RF, it is the same as the
"B-SCAN" and "PREV" buttons combined. (See PARTS
AND FUNCTIONS, FRONT PANEL diagram, #9, #12)
5. SEARCH: The SEARCH button on the hand held remote
control allows the user to "skip" ahead to the next song.
When a song is playing, it serves as a "fast-forward"
button and will "SCAN" the song selection. On the front
panel of the CDG-600RF it is the same as the "F-SCAN"
and "NEXT" buttons combined. (See PARTS AND
FUNCTIONS, FRONT PANEL diagram, #11, #13)
6. PLAY: Starts and pauses the CD/CDG player. Press
once to start song selection and once to pause. Press
again to resume playing song selection.
7. STOP: Stops the CD/CDG player.
8. MEMORY: The MEMORY button allows the user to
program song selections from the hand held remote
control. To program the CDG-600RF player with the
remote control the steps are the same as to program the
player from the front panel of the CDG-600RF. (See
PARTS AND FUNCTIONS, FRONT PANEL diagram, #8).
When programming song selections, instead of pressing
the memory button on the CDG-600RF, press the
memory button on the remote control.