Advertisement
TROUBLESHOOTING
Nothing is displayed on the screen.
•
Is the monitor's power cord plugged in?
- Check if the power cord is correctly plugged into the power outlet.
•
Is the power LED on?
- Check the power cable connection and press the power button.
•
Is the power on and the power LED displaying white?
- Check that the connected input is enabled ([Settings]
•
Is the [No Signal] message being displayed?
- This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
•
Is the [Out of Range] message being displayed?
- This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the "PRODUCT SPECIFICATION" section of this manual to set the appropriate
frequency.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
•
Did you select the appropriate resolution?
- If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution.
- Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the display.
- The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of the graphics card. If this is the case, contact the manufacturer
of the computer or graphics card for assistance.
20
[Input]).
Advertisement
