Table of Contents
Advertisement
Main Features:
u Adopt the Direct Digital Synthesizer (DDS) technology and provide stable,
precise, pure and low distortion signals.
u 2.4 inch TFT Color LCD with 320×240 resolution, displaying parameters and
graphics of the two channels at the same time.
u The instrument uses 14-bit high-speed D/A converter chip (5Vpp output
quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical
resolution.
u Can output up to 97 groups of functions / arbitrary waveform, contains 33
groups of preset waveforms and 64 groups of user-defined waveforms. Preset
waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and
cycle time can be set accurately), Triangle/Ramp, CMOS(0~12V), Four
channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc.
u Enable to store 64 arbitrary waveform data files, each one of waveform storage
depth 8192 points * 14bits;
u Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.
u Sweep Function: It can sweep 4 properties of signals including frequency,
amplitude, offset and duty cycle; It has Linear and Logarithm two sweep types;
0.01S~999.99S sweep time; Up, Down and roundtrip sweep directions.
u VCO Function (Voltage Control Output): Can be achieved by an external input
signal: voltage controlling frequency, voltage controlling amplitude, voltage
controlling offset, voltage controlling duty cycle and PWM modulations.
u Burst Output Function: There has Manual Trigger, internal CH2 Trigger, and
External Trigger for your options. It can output 1~1048575 pulse trains.
u 100M Frequency meter function: It can measure frequency, period, pulse width
and duty cycle. Max. frequency workable is 100MHz and Min. frequency
workable is 0.01 Hz.
u Counter Function: It has 2 coupling measure modes including DC coupling and
AC coupling. This design can solve inaccuracy problem of AC coupling.
u Standard dual full functional channels which are equivalent to two independent
generators.
u Channel SYNC Function: Support waveform copy and state copy between
channels.
u Support two or more signal generators connected to achieve multi-channel
output, the maximum support 16-channel synchronous output, the phase
between each channel can be adjusted.
AD8660 Series User's Manual
AD INSTRUMENTS
5
Advertisement
Table of Contents
