Sweep Start Position - ADInstruments AD8660 Series User Manual

AD INSTRUMENTS

Sweep Start Position

When Sweep function is enabled. Sweep start position need to be set
according to sweep objects.
l Frequency Sweep: Press STAR button to highlight start frequency parameter.
Press the Arrow buttons and rotate the ADJ Knob to set the specified value.
For example:
START ： 00'010.000'000'000kHz
l Amplitude Sweep: Press STAR button to highlight start amplitude parameter.
Press the Arrow buttons and rotate the ADJ Knob to set the specified value.
For example:
START ： 10.00V
l Offset Sweep: Press STAR button to highlight start offset parameter. Press
the Arrow buttons and rotate the ADJ Knob to set the specified value. For
example:
START ： 00.00V
l Duty Cycle Sweep: Press STAR button to highlight start duty cycle parameter.
Press the Arrow buttons and rotate the ADJ Knob to set the specified value.
For example:
START ： 50.0%
30 AD8660 Series User's Manual