Technical Specification - ADInstruments AD8660 Series User Manual

Fully numerical control dual channel function/arbitrary waveform generator
Table of Contents

Advertisement

Technical Specification

Unless specified, all specifications can be guaranteed if the following two
conditions are met.
l The generator has passed self-inspection.
l The generator has been working continuously for at least 30 minutes
under the specified temperature (18℃~28℃).
All the specifications are guaranteed unless those marked with "typical"
Frequency
Model
Sine
Square
Ramp, Triangle
Pulse
TTL/CMOS
Arbitrary Waveform
Minimum pulse width
Min. Resolution on
all frequency range
Accuracy
Stability
Waveform Characteristics
Waveforms
Non-Volatile Storage
Waveform Length
Sampling Rate
Vertical Resolution
Sine
AD8660 Series User's Manual
AD8660
0~60MHz
0~25MHz
0~10MHz
0~10MHz
0~10MHz
0~10MHz
20ns(All models of pulse wave minimum width can reach 20ns)
1μHz (Min. resolution can reach 1μHz on all frequency range
to ensure adjusting accuracy under high frequency. For example,
it can output 10.000000000001MHz signal).
±20ppm
±1ppm/ 3hours
Sine, Square, Rectangle (Duty Cycle adjustable), Pulse (Pulse
width and cycle time can be set accurately), Triangle/Ramp,
Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full
wave, Positive Step, Inverse Step, Positive Exponent, Inverse
Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal
Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM,
and other 64 sets customer-defined waveform.
Can store 64 user-defined arbitrary waveforms, (8K 14bits) * 64
8192 points * 14bits
250MSa/s
14 bits
Harmonic
≥50dBc(<1MHz); ≥45dBc(1MHz~20MHz);
Suppression
Total Harmonic
<0.5% (20Hz~20kHz,0dBm)
Distortion
AD INSTRUMENTS
41

Advertisement

Table of Contents
loading

Table of Contents