Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VP423 User Manual

VIZIO VP423 HDTV10A User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

POWER 'VIZIO' LIGHT – The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to the
sensor. Point the remote control directly at this window for
the best response to the remote signal.

1.2 Side Panel Controls

POWER ( ) – Switch the VP423 HDTV10A on by
pressing the button once. Press the button again to turn the
VP423 HDTV10A off.
MENU – This button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will return to the
previous menu level.
CH + / - – Use these buttons to
step up or down the TV channels.
While the OSD is active, these
buttons function as up and down
controls in the OSD menus.
VOL + / - – Use these buttons to
increase or decrease to the
speaker volume. While the OSD is
active, these buttons function as
left and right controls in the OSD
menus.
INPUT (ENTER) – Repeated
pressing of this buttons steps
through the input sources in the
following sequence: TV, AV (AV/S-
Video), Component, RGB, HDMI 1,
HDMI 2, HDMI 3 and HDMI 4.
Once you have stepped through
the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 5/16/2008 9
www.VIZIO.com