Picture-In-Picture (Pip) Mode; Adjusting Basic Pip Settings - Vizio VP423 User Manual

3.21.2 Picture-In-Picture (PIP) Mode

Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you
can display two pictures at one time. One picture is displayed as the full screen (main screen) and the
other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or
large.
See below for detailed information regarding the PIP sources.
SUB
MAIN
DTV / TV
AV
Component
RGB
HDMI
" " – Indicates which inputs are available for PIP mode.

3.21.3 Adjusting Basic PIP Settings

The PIP channel can be changed by using of the channel up and down key. To change the PIP channel,
press CH up or CH down button on the remote control. It only applies if the sub screen is selected to be
TV input.
The following procedures show the different options, styles and modes of the PIP feature:
PIP Mode
Press the button to highlight the PIP(Picture-in-Picture) selection.
Press the button. A separate menu will appear with the following PIP settings.
Press the button to highlight the PIP mode selection.
Version 5/16/2008
DTV / TV AV
Press the PIP
alternate between PIP, POP
and OFF.
You can swap the program that
is in the main picture with the
program in the PIP sub-picture.
To swap the main picture
program with the PIP sub-picture program, press SWAP on the remote
control. If you press SWAP again, it will return the program to the main
picture.
www.VIZIO.com
VIZIO VP423 HDTV10A User Manual
Component
button to
67
RGB HDMI