Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio JV50P User Manual

VIZIO JV50P HDTV10A User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

Power 'VIZIO' light – The VIZIO name lights white when
powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the sensor.
Point the remote control directly at this window for the best
response to the remote signal.

1.2 Side Panel Controls

(Power) – Switch the JV50P HDTV10A on by pressing the
button once. Press the button again to the JV50P HDTV10A off.
MENU – This button activates the On Screen Display (OSD). If a
sub-menu is active, pressing this button will return to the previous
menu level.
C+/▲ & CH-/▼ – Use these buttons to step up or down the TV
channels. While the OSD is active, these buttons function as up and
down controls in the OSD menus.
VOL+/► & VOL-/◄ – Use these buttons to increase or decrease to
the speaker volume. While the OSD is active, these buttons function
as left and right controls in the OSD menus.
INPUT – Repeated pressing of this buttons steps through the input sources in the following
sequence: TV, AV1, AV2, Component 1, Component 2, RGB, HDMI 1, HDMI 2, HDMI 3 and
AUX IN. Once you have stepped through the entire sequence, you will return to the
beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted.
When the OSD is not active, pressing this button will display the current input mode.
AUDIO IN – Connect your MP3 player here. This input is also the physical input to the AUX
IN in the INPUT menu, therefore; when referring to this input we are talking about sound only. There are
not images carry through this connection.
Version 5/21/2007 8
www.VIZIO.com