Optical Output Of Audio Received - Vizio VP423 User Manual

2.7.1 Optical Output of Audio received

If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical AUDIO
OUT (white area) at the rear of the VP423 HDTV10A. This is active when receiving audio with the
programs being viewed no matter what input is being used.
1. Turn off the power to the PLASMA HDTV and Receiver/Amp.
2. Using an SPDIF cable, connect the cable to the audio input
connector on the Receiver/Amp and connect the other end to
the OPTICAL OUT (white area) audio connectors at the rear of
the PLASMA HDTV.
3. Turn on the power to the PLASMA
HDTV and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the
select the Audio Adjust menu.
6. Press the
select SPEAKERS.
7. Press the
select OFF so that the sound from the PLASMA HDTV will now be routed through your
Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and cannot be connected directly to external speakers.
Version 5/16/2008
on the remote control to
on the remote control to
on the remote control to
www.VIZIO.com
VIZIO VP423 HDTV10A User Manual
26