Basic Operation; Power On / Off; Input Mode Selection - Vizio P4 User Manual

8. Basic Operation

8.1 Power On / Off

8.2 Input Mode Selection

• Press the POWER key to turn on the Display. The power
indicator will change from red to green.
• Press the POWER key again to return the Display to
Standby mode. The power indicator will change from green
to red.
Note: The power indicator will flash for a few seconds before
changing color.
• Press the INPUT key. A menu of input signal sources will
appear on-screen. Use the
source desired and press the
• You may also press the INPUT key repeatedly until the
signal source you want is highlighted. The signal sources
are displayed in the following sequence,
RGB1 RGB2 AV1 S-Video YCbCr/PbPr TV/CATV
RGB1 = Analog D-Sub input on the PC Module.
RGB2 = Digital DVI-D input on the PC Module.
28
VIZIO P4 User Guide
/ keys to select the signal
key to confirm the selection.
VINC.COM