Picture-In-Picture(Pip)/Picture-By-Picture(Pop)Mode; Adjusting Basic Pip/Pop Settings - Vizio P50HDTV10A User Manual

3.5.12 Picture-In-Picture(PIP)/Picture-by-Picture(POP)Mode

Your TV features PIP mode so you can watch two pictures at the same time. When PIP is turned on, you
can display two pictures at one time. One picture is displayed as the full screen (main screen) and the
other picture is displayed in a small window (sub screen). The sub-screen can be set to small, medium or
large.
See below for detailed information regarding the PIP sources.
SUB
DTV
MAIN
DTV
TV
AV1
AV2
Component 1
Component 2
RGB
HDMI 1
HDMI 2
" " – Indicates which inputs are available for PIP and POP modes.
*When HDMI is used for the Sub-Screen it cannot support 1080i.

3.5.13 Adjusting Basic PIP/POP Settings

PIP Channel
The PIP channel is independent of the Main screen
DTV/TV channel. To change the PIP screen channel,
press the PIP CH + or - button on the remote control.
To change the Main screen channel, press the CH +
or – button on the remote control.
Swapping PIP/POP Video
You can swap the program that is in the main picture
with the program in the PIP sub-picture. To swap the
main picture program with the PIP sub-picture program,
press SWAP on the remote control. If you press
SWAP again, it will return the program to the main
picture. This works the same if you are in the Picture-
by-Picture (POP) mode.
Version 5/23/2006
Component
TV AV1 AV2
54
www.VIZIOCE.com
VIZIO P50HDTV User Manual
Component
RGB
1 2
HDMI 1 HDMI 2