Table of Contents
Advertisement
Before applying power
Caution: Read this page carefully to ensure safe operation.
For the U.S.A. and Canada
Important!
Units shipped to the U.S.A. and Canada are designed for
operation on 120 volts AC only.
CAUTION:
TO PREVENT ELECTRIC SHOCK DO NOT
USE THE AC PLUG WITH AN EXTENSION CORD.
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on 240
volts AC only.
The mains plug must be removed from the wall socket prior
to any internal examination.
The wires in this mains lead are coloured in accordance with the
following code:
Blue....Neutral
Brown...— Live
The wires in this mains lead must be connected to the
terminals in the plug as follows:
Wire colour
Plug terminal marking
Blue.. N or Black
Brown......L or Red
2. If a 3-pin plug with earthing contact is used, no wire must be
connected to the E terminal._
For Australia and Europe
Important!
Units shipped to Australia are designed for operation on 240 V AC
only.
Units shipped to Europe are designed for operation on 230 V AC
only.
For other countries
Important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear panel.
Refer to the following paragraph for the proper setting of this
switch.
AC voltage selection
This unit operates on 110 -120 or 220 - 240 volts AC. The AC
voltage selector switch Type A or Type B on the rear panel is set
to the voltage that prevails in the area to which the unit is
shipped. Before connecting the power cord to your AC outlet,
make sure that the setting position of this switch matches your
line voltage. If not, it must be set to your voltage in accordance
with the following direction.
Note:-
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
_
AC voltage selector switch
TvpeA
mnhnm
120 V~°
AC220V~
AC 240 V ~
TvpeB
nm
AC 110 -
AC 220-
120 V~
240 V~
Move switch lever to match your line voltage with
a small screwdriver or other pointed tool.
Safety precautions
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
A
CAUTION
|
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SER¬
VICING TO QUALIFIED SERVICE PERSONNEL.
A
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOL¬
TAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
A
k
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN¬
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
KA-892 (En)
3
Advertisement
Table of Contents
