Royal Sovereign RBC-ES240-CA Owner's Manual page 11

PRODUCT OPERATION
ADD: ADD displays the cumulative total of all bills counted. To turn the ADD mode on,
press "ADD". ADD will appear on the control panel screen. Banknotes will continue
to be added to the total and will be shown on the screen. Press "ADD" to turn off .
ADD is turned OFF when not displayed on screen
BATCH: The machine is preset to common counting mode, which automatically counts
all bills placed into the hopper. Batch is used when you wish to count specific quantities.
Batch can be set from 1 to 999.
denominations of 30, you would set the BATCH to stop after 30 banknotes have been
counted. All banknotes will therefore be counted in denominations of 30.
1. To turn ON BATCH function, press "BATCH". BATCH will appear on the control
panel screen. The default batch setting is to 100. By pressing "BATCH" a second
time, the batch quantity can be changed to 50. Pressing "BATCH" a third time
will change the batch to 20.
2. To customize the quantity, you can simply press on the keypad the batch quantity.
For example, if you wish to batch in quantities of 30, simply press on the keypad "0"
followed by "3", followed by "0" (Enter 030). The number 30 will be displayed on
the control panel. Next, press "START".
•
.
6. M/A Manual/Automatic Start Mode:
This unit is preset to automatically start counting bills once placed into the hopper. The
word AUTO will appear on the control panel screen. To change to the manual start
mode, press "M/A". MANUAL will appear on the control panel screen. When set to
MANUAL setting you need to press "START" to begin counting.
(CONTINUED)
For example, if you would like to count $20 bills in
10