Connecting Your Dvd Player; Using Digital Video - Vizio L30e User Manual

2.2 - Connecting Your DVD Player

You have several options for connecting your DVD player to your new L30e LCD TV - DVI,
Component, S-Video, and Composite inputs. Based on your home theater configuration, you can
decide which option is the right one for you.

2.2.1 - Using Digital Video

DVD players that have a digital interface compliant with the DVI (Digital Visual Interface) standard,
such as the BRAVO D2 DVI Enabled DVD Player from VIZIO, should be connected to the DVI
input of the VIZIO L30e LCD TV.
Note:
a) Use TMDS signals conforming to DVI standards. The TMDS input is a single link input.
b) To maintain the display quality, use a DVI cable from VIZIO that is 10 meters or less.
Installation:
1. Turn off the power to the LCD TV and DVD player.
2. Connect a DVI-D cable to the DVI output of your DVD player and the other end to the DVI
input in the rear of your LCD TV.
3. Connect the Audio on your DVD player to the DVI Audio In next to the DVI In connection
in the rear of your LCD TV.
4. Turn on the power to the LCD TV and your DVD player.
5. Select DVI using the INPUT button on the front of the LCD TV.
Note:
a) The DVI input on your LCD TV supports High-bandwidth Digital Content Protection
(HDCP). HDCP encrypts the transmission between the video source and the digital
display for added security and protection.
b) Refer to your DVD player user manual for more information about the video output
requirements of the product.
Version - 2/17/2005 15
www.vizioce.com
VIZIO L30e User Guide