Comments; General Comments; Manufacturer; Data, Images, Changes - Jungheinrich WMT 210 Service Manual

1.

Comments

1.1

General Comments

This manual is about administration and usage of the Jungheinrich truck terminals WMT 210 and 215,
referred to in the following as device You can find further information for mounting, cabling and safety-
relevant aspects in the separate available operation instructions.
The original version of this manual is in German. Every non-german version is a translation.
1.2

Manufacturer

Manufacturer of this product is the Jungheinrich AG, referred to in the following as Jungheinrich.
1.3

Data, Images, Changes

All data, images and changes have been created to the best of one's knowledge and belief. There is
no assurance for any specification. There is no guarantee for integrity and topicality. Subject to change
without prior notice.
1.4

Trademark

All mentioned (soft-/hardware, brands) descriptions are protected by the general trademark right. Other
used foreign brand names are acknowledged. Jungheinrich reserves the right to assert all rights in the
event of a breach of the trademark rights.
1.5

Copyright

This manual is protected by copyright. All entitled users can use this document as part of the purpose
regarding the contract. Every change in usage or recycling of the supplied contents, especially multipli-
cation, changes or publication needs to be approved by Jungheinrich.
Jungheinrich reserves the right to assert rights concerning events of a breach of the copyright.
The copyright of this manual belongs to JUNGHEINRICH AG.
Jungheinrich Aktiengesellschaft
Friedrich-Ebert-Damm 129 - 22047 Hamburg - Deutschland
Telefon: +49 (0) 40/6948-0 - www.jungheinrich.com
Page 4 v1.1 24.05.2023 LS-Support-Interfaces@jungheinrich.de