Replacement Parts - Powermatic 2415 Operating Instructions And Parts Manual

Trouble
Machine will not
start/restart or
repeatedly trips
circuit breaker or
blows fuses.
Band Saw does not
come up to speed.

Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848, Monday through Friday (see our website for business hours, www.powermatic.com).
Having the Model Number and Serial Number of your machine available when you call will allow us to
serve you quickly and accurately.
Probable Cause
Miswiring of the unit.
Switch failure.
Extension cord too light or too long.
Low current.
Remedy
Double check to confirm all electrical
connections are correct. Refer to
appropriate wiring diagrams on pages
54 through 57 to make any needed
corrections.
If the start/stop switch is suspect, you
have two options: Have a qualified
electrician test the switch for function,
or purchase a new start/stopswitch
and establish if that was the problem
on changeout.
Replace with adequate size and
length cord.
Contact a qualified electrician.
32