Introduction - Powermatic 1791216K Operating Instructions And Parts Manual

22. Make your workshop child proof with padlocks, master switches or by removing starter keys.
23. Give your work undivided attention. Looking around, carrying on a conversation and "horse-play" are
careless acts that can result in serious injury.
24. Maintain a balanced stance at all times so that you do not fall or lean against the blade or other
moving parts. Do not overreach or use excessive force to perform any machine operation.
25. Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job for
which it was not designed. The right tool will do the job better and safer.
26. Make relief cuts where possible, when cutting curved stock.
27. When feeding small work pieces into the blade, always use a push stick, fixture, or similar device to
keep hands at a safe distance.
28. Use recommended accessories; improper accessories may be hazardous.
29. Do not expose machine to rain or use in wet or damp locations.
30. Maintain tools with care. Keep blades sharp and clean for the best and safest performance. Follow
instructions for lubricating machine and changing accessories.
31. Turn off the machine and disconnect from power before cleaning. Use a brush or compressed air to
remove chips or debris — do not use your hands.
32. Do not stand on the machine. Serious injury could occur if the machine tips over.
33. Never leave the machine running unattended. Turn the power off and do not leave the machine until it
comes to a complete stop.
34. Remove loose items and unnecessary work pieces from the area before starting the machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious and possibly fatal
injury.

Introduction

This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for a Powermatic Model PWBS-14CS Band Saw. This manual contains
instructions on installation, safety precautions, general operating procedures, maintenance instructions
and parts breakdown. This machine has been designed and constructed to provide years of trouble free
operation if used in accordance with instructions set forth in this manual. If there are any questions or
comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at
our web site: www. waltermeier.com.
The specifications in this manual were current at the time this manual was published, but because of our
policy of continuous improvement, Walter Meier reserves the right to change specifications at any time
and without prior notice, without incurring obligations.
6