Adjusting The Lens - Vivotek FD8161 Quick Installation Manual

7

Adjusting the Lens

Based on the live image retrieved from the camera, adjust the camera lens by doing the
following:
To adjust the viewing angle
1. Loosen the pan adjustment screw and then turn the lens module left and right. Upon
completion, tighten the screw.
2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Loosen the rotation adjustment screw and then turn the lens to adjust the image
orientation. Upon completion, tighten screw.
Rotate the screw
Turn the lens
Out AV
In Audio
4 3 2
PAL Ext
2 1
ON
NTSC Int.
Loosen
Pan 350°
The sophisticated 3-axis mechanism design offers very flexible, easy hardware installation
for either ceiling or wall mount.
1
1
Tighten
Loosen
3-axis Mechanism Design
Rotate 350°
DO NOT over rotate the lens. Doing
so will damage the camera lens
module
Out AV
In Audio
PAL Ext 4 3 2 1
2 1
ON
NTSC Int.
2
Tighten
Tilt 85°
Pan 350°
Tilt 85°
EN - 10
In Audio Out AV
PAL Ext 4 3
2 1
ON
NTSC Int.
Rotate 350°
Pan Adjustment Screw
Tilt Adjustment Screw
Rotation Adjustment Screw
2 1
Loosen
3
Tighten