Advertisement
Note:
» Point the rernote control at sensor {1} on
the main unit.
Otherwise, remote control operation may
not be executed,
* When the main unit is in direct sunlight,
remote control operation might not be
possible.
Common
Functions for Tuner and
CD
£43] Attenuator
[14] Learn
Following the procedures below, the learn
button on the remote controller can be
used to perform the same operation as the
button on the main unit.
1. Set to learn mode by pressing button [9]
for at least 2 seconds. ("LRN" will be
displayed.}
+ The learn mode will be canceled after
about 8 seconds.
2.Press the button on the main unit that
you want memorized on the remote
controler,
* Learn function cannot be used for
button 721.
120} Volume
18
CD Functions
Tuner Functions
{15] Band
[48] CD power source
1161 BSM
Press the button to turn the CD power
Hold down the button for at least two
source ON and OFF,
seconds to switch the BSM function ON
{49} (~#} (} Track Number Search
and OFF.
When this button ts pressed, the track
[17] tuner power source
number will advance.
Press the button to switch the tuner power
source ON and OFF.
(419] (+4) (> } Seek tuning/Manual tuning
Press the buttons to select the station.
Press button [2] on the main unit to switch
between seek tuning and manual tuning
(see "Listening to the radio").
leis not possible to switch between seek
and manual tuning using button {19}.
{19] (4) (¥} Preset Tuning
When this button is pressed, the stations
stored under the button [10] will be recalled
in sequence.
hee
hidi
arcen wr
an 4g
hd
ada na
iene o.,
Advertisement
