Vivitar Vivicam 5399 User Manual page 27

b. Insert the card into the camera;
Power on
c.
c. Press the "MENU" button to enter "setup":
d. Press the UP or DOWN button
Press the RIGHT button for 2 options: "Yes", "No". Then press the UP
e.
or DOWN button to select "yes";
Press the OK button to format the memory card.
f.
Attention: do not pull out the card or take out the battery when formatting
to avoid any failure of the card.
The following card is available to this camera:
Standard SD card（8 MB –2GB）
3V（3.3V）card（8 MB – 2 GB）
5V card is not available
The camera may be unable to recognize the non-standard card
or formatted by another device (such as another camera).
Please format the card in this camera before use.
4. Security
To avoid the danger of electric shock, do not open the camera or fix the
camera by yourself.
Keep the camera in dry condition, the humidity may cause the failure of the
camera.
Stop using the camera immediately if the camera affected with damp. It is
necessary to dry the camera in the air before reuse the camera.
to select "format";
26
English