Table of Contents
Advertisement
adjacent worktop, which is firmly
connected to the neighboring
cupboards.
Follow the safety instructions.
1.
→ page 4
Follow the instructions for electrical
2.
connection.
Check the scope of delivery and
3.
the condition of the device.
Take the required installation dimensions
4.
from the assembly instructions.
Set up the device horizontally using
5.
the adjustable feet.
Make sure you have a secure footing.
Install the waste water connection.
6.
→ Page 13
Install the drinking water
7.
connection. → Page 13
Connect the device to power.
8th.
4.3 Waste water connection
Connect your device to a wastewater
connection so that water
contaminated by the rinse cycle can
drain away.
Install waste water connection
Please refer to the assembly
1.
instructions provided for the
necessary steps.
Connect the waste water hose to
2.
the drain connection of the siphon
using the included parts.
Make sure that the drain hose is not
3.
kinked, crushed or twisted.
Make sure that there is no cover in
4.
the drain that prevents the waste
water from flowing out.
Setting up and connectingde
4.4 Drinking water connection
Connect your device to a drinking
water connection.
Install drinking water connection
Hints
¡Make sure you do that
Connect the device to a water inlet
with a safety device to prevent
drinking water contamination
through backflow (according to DIN
EN 1717). The connection valves/
water taps provided for this purpose
are equipped with this safety device
if the house is installed correctly.
¡If you replace the device,
you must use a new water inlet
hose.
Please refer to the assembly
1.
instructions provided for the
necessary steps.
Connect the device to the drinking
2.
water connection using the
included parts.
Observe the technical data.
Make sure that the drinking water
3.
connection is not kinked, crushed or
twisted.
4.5 Electrical connection
Connect the device electrically
Hints
¡Observe the safety instructions
wise → page 4 .
¡Please note that the water
Safety system only works when
there is power supply.
Insert the cold appliance plug of the
1.
mains connection cable into the
device.
13
Advertisement
Table of Contents
