Bosch SMV6ECX00E Instructions For Use Manual page 39

basic
position
Hot water
TimeLight
Starter program
Factory setting (may vary depending on device type)
1
Display text Selection
A:00 A:00 - A:01
1
S:01 S:00 - S:01
1
SP:01 SP:00 - SP:01
1
Basic settingsde
Description
Set cold water connection
or hot water connection. Set
the device only for hot
water,
if the hot water is processed
economically and a suitable
installation is available, e.g. B.
a solar system with a
circulation line. The water
temperature should be a
minimum of 40°C and a
maximum of 60°C.
Turn on hot water
"A:01" or switch off
"A:00".
Turn TimeLight on or off.
While the program is running,
status information about the
time delay, the program or the
remaining time is projected
onto the floor below the device
door. With the base panel
pulled forward
or when installed high with a
flush furniture front, the
display is not visible.
The level "S:00" switches the
TimeLight off.
Set predefined program
when switching on the device.
¡When hiring
"SP:00" is the last program
selected when the device is
switched on.
set.
¡When hiring
"SP:01" is the Eco 50°
program preset when the
device is switched on.
39