Hitachi RC-AGU1EA0G Manual page 7

User can use the device simply as an air circulator.
Timer and Timer are available.
Timer Reservation
1
Off Time setting
• Select the Off Time by pressing the
Button.
• Setting time will change according to the below
sequence when you press the button.
Set Temp. -0.5Hr. -1.0Hr. -2.0Hr-3.0Hr.......... -10.0Hr. -11.0Hr -12.0Hr.
2
On Time setting
On Timer
• Select the On Time by pressing the
• Setting time will change according to the below
sequence when you press the button.
Set Temp. -0.5Hr. -1.0Hr. -2.0Hr-3.0Hr.......... -10.0Hr. -11.0Hr -12.0Hr.
NOTE
・During setting timer, if you do not press any button for 3 seconds then it will come out of setting timer mode
with preset time.
And On Timer icon " " or Off Timer icon "
・During setting timer, if you press active button then it will come out immediately with timer setting.
・Timer On and Timer Off can be set simultaneously.
・When both timer set simultaneously then arrow "
which will execute first.
・On Timer or Off Timer can be canceled without long scrolling by pressing On Timer and Off Timer button
together for 3 seconds.
1 Press the M
(F ).
Press the
Fan Speed
2
(S
START
Press the
STOP
Press the button again to stop operation.
Off Timer
Cancel OFF Timer
Button.
On Timer
Cancel ON Timer
" will remain on LCD to indicate timer setting.
" mark will appear on LCD appear near "
- 7 -
selector button so that the display indicates
button.
) (L )
(Super High)
button. Fan operation starts with a beep.
Operation stop at setting time
Operation will start
temperature at setting time.
( )
(High)
setting
" or " "