Hitachi RC-AGU1EA0G Manual page 16

My Mode(Programming)
Use this mode for personalized comfortable settings. The My Mode can be set by using the remote controller.
Up to 3 programs can be set.
Programming of My Mode
Default Setting of My Mode
My Mode Mode
My Mode1 COOL
My Mode2 COOL
My Mode3 COOL
Enter to My Mode programming
Press the My Mode button continuously for 5 seconds .
" " blinks on the LCD. And " ", "
1 1
The blinking of " " will remain for 10 seconds.
By pressing the
selected for programming.
Mode Selection
Press (Mode) button in order to select desired Mode during "
1 2
blinks.
Mode will change from
(Fan) cyclically.
Fan Speed Selection
Press (Fan Speed) button in order to select desired Fan Speed
1 3
during " " blinks.
Available Fan speed only can be selected as per selected desired mode.
Desired Room Temperature Selection
Press button or
1 4
Temperature during "
Temperature range can be set between 16.0℃ and 32.0℃.
Fan Mode can not be set desired Room Temperature.
Silent Mode Selection
Press (Silent) button in order to set or cancel Silent Mode during
1 5
" " blinks.
- 16 -
Temperature Fan Speed ON Timer /
OFF Timer
25.℃ Auto No setting
25.℃ Auto No setting
25.℃ Auto No setting
" or " " appear at the right of "
(My Mode) button, " ", "
(Heat) (Auto)
button in order to select desired Room
" blinks.
Silent
No setting
No setting
No setting
".
" or " " can be
"
(Cool) (Dry)