Step 2: Connecting The Vivicam 3780S To Your Computer - Vivitar Vivicam 3780 User Manual

Step 2: Connecting the ViviCam 3780s to Your
Computer
1. Connect one end of the USB cable to
an available USB port on your computer.
2. Connect the other end of the USB cable to
the USB connector on the ViviCam 3780s.
3. Select [Disk Drive] using the /
and press the SET button.
4. From the Windows desktop, double click
on "My Computer".
5. Look for a new "removable disk" icon.
This "removable disk" is actually the
memory (or memory card) in your ViviCam
3780s. Typically, the ViviCam 3780s will
be assigned drive letter "e" or higher.
6. Double click on the removable disk and
locate the DCIM folder.
7. Double click on the DCIM folder to open
it to find more folders.
Your recorded images and video clips
will be inside these folders.
Copy & Paste or Drag-N-Drop image
and video files to a folder on your
computer.
Mac users:
Double-click the "untitled" disk drive icon on our desktop. iPhoto may
automatically launch. The volume label may vary depending upon whether
you use internal ViviCam 3780s memory, or a memory card.
When transferring images to the computer, there is no need to install any batteries
into the ViviCam 3780s. The ViviCam 3780s will automatically power on when
connected to the computer via USB cable.
buttons
E-35