Step 1: Installing The Usb Driver; Step 2: Connecting The Vivicam 4000 To Your Computer - Vivitar Vivicam 4000 User Manual

Step 1: Installing the USB Driver

For Windows 98 computers only
The USB driver on the CD-ROM is exclusively for Windows 98 computers.
Installing the USB driver on computers running Windows 2000/ME/XP is not
necessary.
1. Insert the CD-ROM that Vivicam 4000 with
the camera into your CD-ROM drive. The
welcome screen appears.
2. Click "Install USB Driver". Follow the on-
screen instructions to complete the
installation. After the USB driver has been
installed, restart your computer.

Step 2: Connecting the Vivicam 4000 to Your Computer

1. Set the mode dial to [ PC ].
2. Connect one end of the USB cable to an
available USB port on your computer.
3. Connect the other end of the USB cable to
the USB connector on the Vivicam 4000.
4. From the Windows desktop, double click
on "My Computer". (Mac users will see a
new disk icon directly on the desktop.)
5. Look for a new "Removable disk" icon. This
"Removable disk" is actually the memory
card in your Vivicam 4000. Typically, the
Vivicam 4000 will be assigned drive letter
"e" or higher.
6. Double click on the removable disk and
locate the DCIM folder.
7. Double click on the DCIM folder to open it
E-75