Advertisement
How to remove the stator frame
1. Remove
the automatic
mechansim
plate.
(Refer to
"How to remove the automatic mechanism plate.'')
. Remove the 4 setscrews (Fig.
4: @ ~ @) of the stator
frame.
. Remove
the
stator
frame
from
the
2 claws
in the
direction of the arrow.
(Fig. 4)
How to remove the PU fixing plate
1. Remove
the automatic
mechanism
plate.
(Refer to
"'How to remove the automatic mechanism plate.'')
. Remove the PU fixing plate setscrew (Fig.5: @® ).
Then the PU fixing plate can be removed.
How to remove the tonearm
1. Remove the PU fixing plate. (Refer to "How to remove
the PU fixing plate.'')
2. Remove the shield plate. (Fig. 5)
3. Unsolder the 5 lead wires of the phono output terminal.
(Fig. 5)
4. Remove the tonearm setscrews (Fig. 5: @, @ ).
Then the tonearm can be removed.
e How to remove the lift base and arm lift
1. Remove the tonearm.
(Refer to "How to remove the tonearm".)
2. Remove the 2 setscrews (Fig. 6 : @ , @ ) of the lift
base. Then the lift base can be removed.
3. Remove the screw (Fig. 6 : @ ) of the arm lift. Then
the arm lift can be removed.
e How to remove the Hall element
1. Remove the turntable platter.
2. Remove the terminal solder by use of solder sucker,
3. Hold the Hall element with a tweezers and remove it
while
touching the soldering
iron to the terminal.
(Fig. 7)
Note:
Fit the Hall element with the part No, print up.
The
reverse
in terminal
position
is allowable
provided that the printed side is up.
Fig. 7
Stator frame
PU. fixing plate
Canceller spring
Shield plate
Lead wires
White
L channel (+)
Blue
L channel (—)
Red
R channel (+)
:
Green
R channel (—)
Fig.5
~— Black
Ground (Earth)
Tweezers
Lift base
Hall elements
Arm tift
Advertisement
