Formatting An Sd Memory Card - Vivitar Vivicam 3746 User Manual

Formatting an SD Memory Card

Formatting an SD card will erase all the images and data on the SD memory card.
Be sure the SD memory card is properly inserted into the camera before formatting
it.
1. Set the mode dial to the
the Manual Record mode or the
Playback mode.
2. Press the button.
3. Select FORMAT by using the
buttons, and then press the
4. "FORMAT?" message appears on the
image.
Use the or
and press the
If you want to cancel the action, select
[NO].
5. If you select [YES], the "Frame No. Reset"
message appears.
To reset the frame number, use the
or buttons to select [YES], and press
the button.
If all images are deleted, [
pops up.
NOTE
• The SD memory card cannot be formatted when it is locked. Unlock the SD memory card
first.
• Formatting the SD memory card also erases protected images. All non-image data will also
erased. Before formatting the card, make sure that none of the images on the card are still
required.
• If no memory card is inserted into the camera, the internal memory will be formatted. This
will erase all images stored in the internal memory.
Record mode,
or
button.
buttons to select [YES],
button.
NO IMAGE!]
E
35