Attaching The Camera Strap; Inserting An Sd Memory Card (Optional Accessory); To Remove An Sd Memory Card - Vivitar Vivicam 3746 User Manual

Attaching the Camera Strap

To prevent accidental dropping of the camera,
always use the camera strap.
Attach the camera strap as follows:
1. Thread the small loop of the lens strap
through the strap eyelet on the camera.
2. Pull the large loop through the small loop
until the strap is firmly secured.
Inserting an SD Memory Card
(optional accessory)
E
The camera comes with 16MB of internal memory, allowing you to store images
and video clips in the camera. However, you can expand the memory capacity
by using an optional SD memory card so that you can store more images and
video clips.
1. Make sure the camera is turned off.
2. Slide the SD memory card cover.
3. Inset an SD memory card.
The face of the memory card (printed
arrow) should face towards the back side
of the camera (the side with the LCD
display), as shown.
If the card cannot be inserted, check the
orientation.
4. Close the SD card cover.

To remove an SD memory card

1. Make sure the camera is off.
2. Open the SD card cover.
3. Press lightly on the edge of the memory card and it will eject.
• To prevent valuable data from being accidentally
NOTE
erased from an SD card you can slide the write
protect tab (on the side of the SD memory card) to
"LOCK".
• To save, edit, or erase data on an SD memory card,
you must unlock the card.
16
LOCK LOCK
Write protection Write protection
tab state