Table of Contents
Advertisement
set the desired aperture value. Press the shutter button halfway down to activate the exposure
system, the corresponding shutter speed will be displayed on the monitor. The aperture
value can be changed in two steps : f/3.0 and f/6.7 at the lens' wide angle position, f/3.6 and
f/8.0 at the lens' telephoto position. As the lens is zoomed, the aperture will automatically
shift. If the aperture value is beyond the shutter speed range, the shutter speed display will
turn red on the monitor.
Manual Exposure - M
Manual exposure mode allows individual selection of apertures and shutter speeds. This
mode overrides the exposure system giving the photographer total control over the final
exposure. The shutter speeds can be changed in half stop increments between 1/1000 and
4 seconds. The shutter speed and aperture display will turn red on the monitor if the image
is extremely under or overexposed.
Press the EV
value can be set with a double arrow icon to the left of it by pressing the
White Balance
The white balance can be adjusted so that images can be recorded in natural colors no matter what
light source the subject is exposed to.
Auto
The automatic white balance compensates for the color temperature of a scene. In most
cases, the AUTO setting will balance the ambient light and create beautiful images.
Preset
Preset white balance settings must be set before the image is taken.
30
button to switch between the shutter speed and aperture display. The
Cloudy
Daylight
Tungsten
Fluorescent
For overcast outdoor scenes.
For outdoor and sunlit subjects
For incandescent lighting
For fluorescent lighting
/
buttons.
Advertisement
Table of Contents
