Huawei B320-323 Quick Start Manual page 9

FAQs
How do I restore factory settings?
When the router is powered on, use a needle-type object to press and
hold the Reset button, until the network status indicator starts to flash.
Release the button, and the router will restore to its factory settings.
What should I do if I forgot the Wi-Fi password or the
login password for the web-based management page?
Restore the router to its factory settings and then use the default Wi-Fi
password and login password to try again.
What should I do if the network status indicator is red
or an Internet connection cannot be established?
1 Check if the SIM card is inserted. Refer to the Setup section for the
right size of SIM card and the right way to insert it into the slot.
2 If the issue persists, restore the router to factory settings and try
again.
3 Contact your carrier to check if your SIM card is out of service. If it's
a new card, check if it has been activated.
What should I do if the Internet speed is slow?
1 Check the signal strength indicator on the router. If it shows weak
signal, adjust the router's direction or move it close to a window to
improve signal reception.
2 If your device is connected to the router over Wi-Fi, adjust your
device's position to receive better signal.
3 Restart the router and your device, and try again.
4 Check if you have reached your data traffic limit for the month. If so,
your carrier may limit your Internet speed.
How can I connect to the router using WPS (Wi-Fi
Protected Setup)?
To connect a WPS-enabled device to your router using the WPS
button:
1 Press the WPS button on the router, and the Wi-Fi indicator will start
to flash.
2 Enable WPS on your device within 2 minutes to connect to the
router's Wi-Fi network.
Why can't I access the router's web-based
management page?
1 Ensure that your computer is connected to the router through an
Ethernet cable or Wi-Fi.
2 Ensure that your computer is set to obtain an IP address and DNS
server address automatically.
3 Restart your browser, or try using another browser.
4 If the problem persists, restore the router to its factory settings.
6