Cleaning And Care - Klarstein LOIRE Manual

CLEANING AND CARE

Cleaning
1. After automatic cleaning, please open the lid for ventilation and release the
steam.
2. Unplug the device from the mains outlet and wipe the outside of the device
case with a dry cloth. To avoid damaging the device, never immerse it in water
or other liquids and never clean it under running water or other liquids.
3. Do not immerse the case, power cord or other electrical components of the
device in water.
4. Do not expose the device, the power cord and the packaging accessories to
direct sunlight.
5. If there are small residues on the wall of the blender jar after repeated use,
it is recommended to wipe the inner wall with a damp cloth. Switch off the
device beforehand and let the inside of the container cool down. Then clean
and sterilise the device with the "High Temp. Clean/Hold Fast Clean" function.
6. The accessories such as the lid and the residual water tray should be rinsed
with water and dried after each use.
7. After using the device, open the steam valve to check if there is any residue in
the lid. If this is the case, it is advisable to clean the lid by hand.
Maintenance
• If you will not be using the device for a long time, keep it in a dry and
ventilated place to prevent the motor from being damaged by moisture and
rust.
EN
35