Sony KP-53XBR45 Operating Instructions Manual page 6

Step 2:
Connections
Although you can use either an indoor antenna or
outdoor antenna with your projection TV, we
recommend connecting to an outdoor antenna or a
cable TV system for improved picture quality.
For the customers who connect a cable box, skip "Step
4: Setting up the projection TV automatically (AUTO
SET UP)" (page 14) and proceed to "Selecting the cable
box output channel (TV INPUT)" (page 18).
Sa pa a a ee
Connecting an antenna
Connect your antenna cable to the VHF/UHF antenna
terminal. If you cannot connect your antenna cable
directly to the terminal, follow one of the instructions
below depending on your cable type.
(Rear of projection TV)
VHF/UHF
° MEE ony 75-ohm coaxial cable
° = s
e VHF/UHF
or
© Cable
B (Rear of projection TV)
VHF only 300-ohm twin lead cable VHF/UHF
or
e UHF only
or
e VHF/UHF Antenna connector
C 75-ohm coaxial cable
e VHF
(Rear of projection TV)
VHF/UHF
and ED)
_t (not supplied)
* UHF —
300-ohm twin lead cable
Notes
¢ Most VHF/UHF combination antennas have a signal splitter.
Remove the splitter before attaching the appropriate
connector.
e For better picture quality, connect an antenna by using a 75-
ohm coaxial cable.
GEN Getting Started
Connecting an antenna/cable TV
system without a VCR
To cable or antenna
(Rear of projection TV)
VHF/UHF
——i€)))
Cable
To cable box
If your cable company requires you to connect a cable
box, make the connection as follows:
(Rear of projection TV)
VHF/UHF
Cable D
Cable box
To cable box and cable
(Rear of projection TV)
AUX
——)))
YD
Cable box 75-ohm coaxial cable
(not supplied)
VHF/UHF
——————————J) =f)
CATV cable
Some cable TV systems use scrambled or encoded
signals requiring a cable box* in addition to the normal
cable connection.
* The cable box will be supplied by the cable company.
To cable and antenna
(Rear of projection TV)
AUX
—K))
CATV cable
VHF/UHF
ir)
Antenna cable