Sony KP-53XBR45 Operating Instructions Manual page 20

Muting the sound
Press MUTING.
"MUTING'" appears on the screen.
MUTING
To restore the sound, press MUTING again, or press
VOL +.
Displaying on-screen information
1 Press DISPLAY.
Channel number, the current time (if set), channel
caption or logo (if set), and MTS mode (if SAP is
selected) are displayed. SAP indication disappears
after 4 seconds. DISPLAY
2 Press DISPLAY again.
XDS (Extended Data Service) is turned on. If the
station provides this service, program information,
program type and program length are displayed.
DISPLAY
3 Press DISPLAY again.
Caption Vision (if set) is displayed. (See page 39.)
DISPLAY
To cancel the display, press DISPLAY again.
Freezing the picture
You can freeze the picture.
Press FREEZE. FREEZE
This feature is useful when you want to write down a
recipe from a cooking program, a displayed address or
phone number or the like.
To restore the normal screen, press PIP OFF.
Note
* This feature is also available for PIP/P&P mode. See page 22.
2OQEN
Operations
Setting the Sleep Timer
The projection TV stays on for the length of time you
specify and then shuts off automatically.
Press SLEEP repeatedly until the time (in
minutes) you want appears.
Each time you press SLEEP, the time changes as
follows: 30 —» 60 —+ 90 — OFF.
SLEEP
"SLEEP" appears about one minute before the
projection TV shuts off.
To cancel the Sleep Timer, press SLEEP repeatedly
until "SLEEP OFF" appears, or turn off the projection
TV.
The sleep timer is also canceled when you select AUTO
PROGRAM under the SET UP menu.
Watching a video input picture
Press TV/VIDEO repeatedly until the desired
video input appears.
Each time you press TV/ VIDEO, the display changes
as follows: TV —+ VIDEO 1 — VIDEO 2 — VIDEO 3
— VIDEO 4— VIDEO 5.
TVNIDEO
To return to TV picture, press TV/ VIDEO until a
channel number appears.
Changing the VHF/UHF input to the
AUX input
Press ANT/AUX.
"AUX" appears beside the channel number.
ANT/AUX
Pressing ANT/ AUX again switches back to VHF/UHF
input.