Programmable Electronic Lock - Master Lock SentrySafe Fire-Safe FPW082FTCML Owner's Manual

Programmable Electronic Lock

NOTE: • Store code (and keys if equipped)
Preparing your safe for first time use
• DO NOT RETURN! Questions or concerns,
FPW082TEST
visit www.masterlock.eu or
SN100TEST01*
www.sentrysafe.com
12345
Find your code on the back of this owner's
manual.
FOR SAFES WITH OVERRIDE KEY ONLY
Keys are shipped inside the safe. DO NOT store your override key inside
the safe. In an emergency situation, the safe can be opened using your
override key.
WARNING
Test your code several times before putting valuables inside.
Unlocking your safe using the override key only
(for select models)
Insert key into the cylinder, turn to the '
1
unlocked' position.
Pull handle outward to open the door.
2
4
in a secure location (other than in
the safe).
Unlocking your safe using the electronic keypad
Enter the 5 digit factory code found on
1
the back of the
owner's manual.
The green light will stay illuminated to
2
indicate the code is correct. You will
have 5 seconds to open your safe.
Pull handle outward to open the door.
3
NOTE: • Factory installed batteries included.
• Delay mode will occur if three consecutive invalid entries have
been tried. Red LED will blink on and off to let you know the
safe is in delay mode. This will cause the system to shutdown
for two minutes. DO NOT remove the batteries to restart the
system it will only increase the length of time for the system
shutdown.
Locking your safe using the override key only
(for select models)
Close the door to re-engage locking
1
bolts.
Turn key to the 'locked' position.
2
Locking your safe using the electronic keypad
Close the door to re-engage locking
1
bolts.
Wait 5 seconds and try to open your safe
2
without entering any code or using the
override key to ensure safe is locked.
NOTE: • If your safe does not appear to be working properly, please
check to make sure you are using NEW CR123 lithium
batteries before contacting Customer Service.