Table of Contents
Advertisement
en
Appliance door
Clean the glass door panels and reflectors on both
11.
sides with glass cleaner and a soft cloth.
:
Warning
Risk of injury!
Scratched glass in the appliance door may develop
into a crack. Do not use glass scrapers, sharp or
abrasive cleaning aids or aggressive or abrasive
cleaning products.
Caution!
Make sure you do not damage the lighting. Do not
clean or touch the LED ‚ in the appliance door.
Dry the door panels and refit them.
12.
Fitting
Note: When fitting the glass door panels, ensure that
they are in the original order.
Insert the intermediate glass panel and push it in the
1.
direction of the arrow until it is fitted in the frame. The
arrow on the intermediate glass panel must line up
with the arrow on the frame (Fig.
Push the intermediate glass panel downwards in
2.
area ‚, insert holder ƒ at an angle and push down
until it locks into place (Fig.
The holder is inserted (Fig.
Caution!
Do not touch the glass rod with bare fingers. Fatty
deposits decrease the effect of light transfer. Clean
the glass rod with glass cleaner once it has been
inserted.
26
!
).
"
).
#
).
Select the left-hand reflector (Fig.
3.
Insert the left-hand reflector „ at the top (Fig.
4.
Insert reflector „ (Fig.
5.
Fit reflector „ into slot ... (Fig.
6.
Insert the second
7.
reflector on the right-hand side in the same way as
the left-hand reflector.
If necessary, use glass cleaner to remove any finger
8.
marks from the reflectors.
Insert the inner glass panel into holder † on the left-
9.
and right-hand side (Fig.
Push down on the inner glass panel until it locks into
10.
)
place (Fig.
).
$
).
&
).
'
).
(
).
%
).
Advertisement
Table of Contents
