Yamaha YZFR3AN 2021 Owner's Manual page 24

Instrument and control functions
Oil change tripmeter
4
1
1. Oil change indicator "OIL"
2. Oil change tripmeter
This tripmeter shows the distance trav-
eled since the last engine oil change.
The oil change indicator "OIL" will flash
at the initial 1000 km, and then at every
5000 km thereafter.
To reset the oil change tripmeter and
oil change indicator, select the oil
change tripmeter, and then push the
"RESET" button until "OIL" and the
tripmeter start flashing. While "OIL"
and the tripmeter are flashing, push the
"RESET" button until the tripmeter is
reset.
EAU88731
TIP
When the
changed, the oil change tripmeter and
the oil change indicator must be reset.
Otherwise, the oil change indicator will
not come on at the correct time.
MPH
Instantaneous
display
2
1. Instantaneous fuel consumption display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either "km/L" or
"L/100 km", or "MPG" when using
miles. To switch the fuel consumption
measurement units, push the "SE-
LECT" button until the measurement
units change.
engine oil has been
EAU87771
fuel consumption
MPH
1
4-7
"km/L": the distance that can be
traveled on 1.0 L of fuel.
"L/100 km": the amount of fuel
necessary to travel 100 km.
"MPG": the distance that can be
traveled on 1.0 Imp.gal of fuel.
TIP
When traveling under 10 km/h (6 mi/h),
"_ _._" is displayed.
Average fuel consumption display
1
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or "AVE_ _._
MPG" when using miles. To switch the
EAU87860
MPH