Page 2
OBTAINING PRODUCTS To learn more about Avaya Inc. products and to order any of these products, access the Avaya web site at www.avaya.com. THE “CE” MARK If the “CE”...
Recorder Interface Installation and Safety Instructions (555-233-132) for more information. Requirements The 201A requires the installation of the 20A Stand. Refer to the 20A Stand, 200A Module Analog (U.S.) Adjunct Interface, and 201A Module Recorder Interface Installation and Safety Instructions (555-233-132) for more information.
Page 4
If a recording device is connected to the 201A, you can record your telephone conversation by pressing the Record button on the device. Depending on the 201A switch setting, the caller may hear a “beep tone” when you are recording a conversation. This tone alerts the caller that the conversation is being recorded.
Verify that the switches on the module are set correctly. For more information, refer to the 20A Stand, 200A Module Analog (U.S.) Adjunct Interface, and 201A Module Recorder Interface Installation and Safety Instructions (555-233-132). Check with your system manager to make certain that the 2420 telephone has been administered correctly.
Page 6
If the telephone is administered correctly but there is still not dial tone, remove power. Remove the module and refer to the 20A Stand, 200A Module Analog (U.S.) Adjunct Interface, and 201A Module Recorder Interface Installation and Safety Instructions (555-233-132). If the 2420 telephone, without the module, has dial tone, connect the module to another telephone.