Page 2
OBTAINING PRODUCTS To learn more about Avaya Inc. products and to order any of these products, access the Avaya web site at www.avaya.com. THE “CE” MARK If the “CE”...
Overview The 200A Module Analog Adjunct Interface is an optional device that can be installed with the Avaya 2420 Digital Telephone. This module allows you to connect an analog device (such as an answering machine) to the telephone. NOTE: Disconnect the 2420 telephone from the wall jack and remove power before removing and/or installing the 200A module.
Page 4
Verify that all cords on the module, the 20A stand, and the auxiliary power supply are securely connected at both ends. Verify that the switches on the module are set correctly. For more information, refer to the 20A Stand, 200A Module Analog (U.S.) Adjunct Interface, and 201A Module Recorder Interface Installation and Safety Instructions (555-233-132).
Page 5
Remove power and refer to the 20A Stand, 200A Module Analog (U.S.) Adjunct Interface, and 201A Module Recorder Interface Installation and Safety Instructions (555-233-132). If the settings are correct, the analog equipment does not detect the “disconnect” signal sent from the 200A Module. You must manually turn off (that is, place on-hook) your analog equipment.