Mitsubishi Electric Lossnay LGH-50 RVS Manual page 2

LOSSNAY CORE CLEANING
Hold the handle and draw the Lossnay cores out from the unit.
Lossnay cores.
CAUTION
2. Put the Lossnay core in a suitable vessel (e. g. a small tub or the
shower tray) and rinse the Lossnay core with clear water from all
sides.
3. Carefully clean the air inlets and housing thoroughly with a broad
soft brush.
4. Rinse the Lossnay core from all sides thoroughly with clear water.
5. Lift the Lossnay core from the vessel and remove the remaining
water inside the Lossnay core by rotating the Lossnay core
repeatedly.
ventilation unit. Operate the unit at least one day for drying inside
the core.
Vacuum cleaner (with
brush attachment)
CAUTION
www.mitsubishi-electric.co.nz | 0800 784 382 www.mitsubishi-electric.co.nz | 0800 784 382
Lossnay core