LG WD-3243RHD Owner's Manual page 7

• Electrical connection
1. Do not use an extensioncord or double adapter.
2. If the supply cord is damaged, it mustbe replaced bythe manufactureror its serviceagents
or similarlyqualified personin order to avoid a hazard.
3. Always unplug the machine and turn off the water supply after use.
4. Connectthe machineto an earthedsocket in accordancewith current wiring regulations.
5. The appliance mustbe positionedso that the plug is easily accessible.
• Washing Machine is to be connected to the water mains using new hoses
Old hoses should not be used.
• Connecting water supply hose
I_ Water supply pressure must be between
4.5 ~ 145 PS1 (30~1000 kPa)
I_Don't strip or crossthread when connecting
Inlet hose to the valve.
I_l]the water supply pressure is more than
I000 kPa, a pressure reducer device should
be installed.
• Two Sealingwasher are suppliedwith the
water inlet hosesto prevent water leaks.
• Checkwater tightness of washing
machine connectionsby turning the tap
completelyon.
• Periodicallycheck the conditionof the
hose and replacethe hoseif necessary,
• Make sure that there is no kink in the
hose and that it is not crushed.
Hot wateL_
Cold
water
• The Inlet hosewhich has red connectoris
for the hotwater tap.