Recharging The Battery - Canon EOS 20D Instruction Manual

Hide thumbs Also See for EOS 20D:
Table of Contents

Advertisement

Recharging
the Battery
For details on the battery, refer to the instructions for Battery Pack BP-511A.
_'_I Remove
the cover.
_ When you remove the battery from
the camera, be sure to reattach the
cover to protect against short circuit.
<-> mark
0G-580
CB-5L
Attach
the battery.
_ Align the battery front edge with the
<-> mark on the battery charger.
While pressing down the battery, slide
it in the direction of the arrow.
_ To detach the battery, follow the
above procedure in reverse.
For 0G-580
Flip out the prongs
and recharge
the battery.
_ As shown by the arrow, flip out the
battery charger's prongs.
_ Insert the prongs into a power outlet.
For CB-5L
Connect
the power
cord and
recharge
the battery.
_ Connect the power cord to the
charger and insert the plug into the
power outlet.
#_ Recharging starts automatically
and
the red lamp starts blinking.
_ The recharging time for a completely
exhausted battery is as follows:
BP-511A and BP-514: Approx. 100 min,
BP-511 and BP-512:
Approx. 90 min,
18

Advertisement

Table of Contents
loading

Table of Contents