Program - Canon EOS 20D Instruction Manual

P Program AE
O
f "30"" and the maximum aperture blink, it indicates
underexposure. Increase the ISO speed or use flash
f "8000" and the minimum aperture blink, it indicates
overexposure. Decrease the ISO speed or use an ND
filter (optional) to reduce the amount of light entering the
L_ Differences Between
<P>
and <f--I> (Full Auto)
In both modes, you can freely change the automatically-set shutter
speed and aperture combination (program).
n the <P > mode,youcan setor usethefuncti0ns below. 0 u[ n0tin the <O > mode.
Shooting Settings Flash Settings (EX-series Speedlite)
AF mode selection Manual/Stroboscopic Flash
AF point selection _, High-speed sync (FP flash)
Drive mode selection =E lock
Metering mode selection _ Flash ratio control
Program Shift
Exposure compensation
AEB
AE lock with <-X-> button
Depth-of-field preview Image-Recording Settings
Clear all camera settings
Custom Function (C.Fn)
Clear all Custom Functions
Sensor cleaning
Flash Settings (Built-in flash)
Flash On/Off
FE lock
=lash exposure compensation
=EB
2nd-curtain sync
Modeling Flash
:_AW and RAW+JPEG selection
ISO speed
White balance selection
Custom white balance selection
White balance correction
WE} bracketing
Color temperature setting
Flash exposure compensation _ Color space selection
3rocessing parameter setting
Shifting the Program
In Program AE mode, you can freely change the shutter speed and
aperture value combination (program) set by the camera while
maintaining the same exposure value. This is callec program shift.
To do this. press the shutter button down halfway, then turn the <_>
dial until the desired shutter speed or aperture value is displayed.
Program shift is canceled automatically after the image is captured.
_ If you are using a flash, you cannot shift the program.
75