Matter; Set Display And Brightness; Set System Sound - EcoFlow PowerInsight User Manual

communicating with the cloud server. 2.4G and 5G Wi-Fi are both supported.
Local area network (LAN): used for connecting and communicating with Matter-
supported devices. Only 2.4G Wi-Fi is supported.
NOTICE
Ensure the Wi-Fi used to connect to the device on your phone is the same as
the local area network you configured for PowerInsight.

Matter

Matter is an open standard for smart home technology that lets your device work with
any Matter-certified ecosystem using a single protocol.
You can integrate the Matter-supported into the EcoFlow system for all-in-one
control.
To add Matter devices to PowerInsight or the EcoFlow app, PowerInsight should be set
as the central gateway. See "Add Matter-supported Devices to EcoFlow System" in the
section "Add Devices" for instructions.

Set display and brightness

Adjust brightness
Dim the screen to extend battery life, or use
Manually adjust in quick settings or in
Switch on or off Adaptive brightness
match the environment.
Standby
If you do not operate PowerInsight, it will show screensavers when on standby.
Automatic standby after a certain time: Choose to be standby automatically after
30 seconds, 1 minute (by default), 5 minutes, 10 minutes, or never. Go to
> Display & brightness
Enable/Disable screensaver: Switch on/off
Settings > Display &
Enable/Disable automatically wake up: Switch on/off
> Display & brightness. If switched on, the home page will be displayed when you
walk towards PowerInsight (less than 0.5 m / 20 in. away from PowerInsight).

Set System Sound

Go to Settings > Sound
enable or disable sound effects when operating PowerInsight.
Adaptive
Settings
to automatically adjust screen brightness to
> Auto standby.
Turn off screen when on standby
brightness.
to adjust the system sound or switch on/off
brightness.
> Display & brightness.
Proximity wake-up
Touch sound
Settings
in
in Settings
to