Bind A Third-Party Account; Mounting Your Powerinsight - EcoFlow PowerInsight User Manual

app.
Now, you can control the device you have just added to the PowerInsight / EcoFlow
app.
NOTICE
Ensure the Wi-Fi used to connect to the device on your phone is the same as
the local area network you configured for PowerInsight.
Only 2.4G Wi-Fi is supported.

Bind a third-party account

In the EcoFlow app, click
party account.

Mounting Your PowerInsight

You can mount the PowerInsight on a wall, place it on a tablet stand holder (not
included in the box), or simply hold it directly in your hand.
CAUTION
Mounting PowerInsight at a height of less than 1.5m is recommended.
Mounting the wall bracket is supported only in landscape orientation, as
shown below.
The USB-C charger with at least 10W and the level are not included in the
box.
To mount PowerInsight:
1. Mount the wall bracket: Use the wall bracket to locate the holes, and make sure to
level them. Then, drill holes and insert anchors. Finally, place the bracket against
the wall and drive the screws through the bracket holes.
+ > Add devices > Add third-party devices to bind a third-