Advertisement
M270 Remote
Attendant Control
for use with
M610LX
M610Q
M610EM
,
AND
SEAT CONTROLS
DEALER: This manual contains important safety and operational instructions specific to the
Motion Concepts M270 Remote Attendant Control box. This Manual MUST be given to the
End User of the product.
USER: Before using this product, please read through the instructions carefully and save
for future reference.
TRD0323 REV E
Advertisement
Table of Contents
Related Manuals for Motion Concepts M270
Summary of Contents for Motion Concepts M270
- Page 1 SEAT CONTROLS DEALER: This manual contains important safety and operational instructions specific to the Motion Concepts M270 Remote Attendant Control box. This Manual MUST be given to the End User of the product. USER: Before using this product, please read through the instructions carefully and save for future reference.
- Page 3 User Manual. The symbols below are used throughout all Motion Concepts’ manuals to identify warnings, cautions and important notes. It is very important for you to read and understand them completely.
- Page 4 PPS to better meet the specific needs of the end user when necessary. IMPORTANT! Program Mode on the M270 remote is password protected. Program access is restricted to Qualified Technical Service personnel only. If you require any changes to your existing programming configurations, please contact your local Dealer or Service Provider for assistance.
- Page 5 - 5 - In Standard Mode the M270 remote operates as an attendant control box using the Left/Right arrows to cycle through the available motor functions on the power positioning system (PPS), and the Up/Down arrows to operate the selected motor function.
- Page 6 Note: Access to the Program Options via the M270 is restricted (password protected) for qualified Technical Service personnel only. Note: the M270 software version is also indicated briefly on the display screen when the remote attendant control is intially powered on.
- Page 7 Your power positioning system should never exceed the recommended safety limits (see below). The angle at which limits are set is critical to the safe operation of the power positioning system. Motion Concepts will not be liable for any injuries or damage sustained when adjustments are made beyond the maximum recom- mended safety limits.
- Page 8 700 Ensminger Rd. Suite 112 Tonawanda, NY, USA 14150 716-447-0050 888-433-6818 Canada 84 Citation Dr. Units 1-7 Concord, Ontario, Canada L4K 1C9 905-695-0134 866-748-7943 www.motionconcepts.com...
Need help?
Do you have a question about the M270 and is the answer not in the manual?
Questions and answers