KUBOTA
U35-4G Excavator
Data Download – Setting up RS232 Connection
1
Plug the RS232/USB adaptor
into a free USB port on your
computer
2
Open up TeraTerm software.
(TeraTerm is an open-source
software tool and easily
accessible via online search)
3
Use the following settings in
TeraTerm: Serial and choose
the correct port connection
Hint:
Click on the COMxx Port with
the "USB serial Port"
connection from the drop-
down menu.
Example:
COM 21
This connection may be
different on your computer.
DATA DOWNLOAD
4
Click OK once the correct
communication port has
been identified.
5
Go to SETUP and click on
Serial Port.
Change the COM ports to the
6
following configuration:
Baud
Rate: 57600 Data: 8 bit
Parity: EVEN
Stop: 2 bit
Flow Control: NONE
26