Related Manuals for Norden Mfg EB-72US
Summary of Contents for Norden Mfg EB-72US
- Page 1 Owner Manual Euro Loader Buckets EB-72US EB-82US EB-82SL EB-94SL Read, Understand, and Follow this manual which provides information MADE IN THE USA and procedures to safely operate and maintain the attachment.
-
Page 3: Table Of Contents
Practice Safe Service Procedures ..23 1.3.1 EB-72US Specifications ..4 Welding Repairs ..... . 24 1.3.2... -
Page 4: Introduction
140 HP or a 3500 pound operating capacity. 1.2 Operator Orientation The directions left, right, front, and rear, as mentioned throughout this manual, are as seen from the operator’s seat, facing in the direction of travel. Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets... -
Page 5: Serial Number Location
1.6 Disposal of Equipment at End of Useful Life The Norden Mfg LLC loader buckets are designed Overall Width 95" for the specific purpose of moving gravel and Overall Length 37"... -
Page 6: Safety
MAY result in minor or occur to you or to other persons. moderate injury. Norden Mfg LLC cannot anticipate every possible NOTICE circumstance that might involve a potential hazard. The warnings in this manual and on the product are, Indicates that attachment or property damage therefore, not all-inclusive. -
Page 7: Safety Icons Nomenclature
Stop engine STOP Not a lifting device Visibility - slow moving vehicle (SMV) Electrocution hazard Set parking brake Entanglement hazard 2.3.2 Prohibited Actions Do not alter or modify Do not leave out tools Euro Loader Buckets Norden Mfg. LLC (877) 296-5851... -
Page 8: General Safety
Impaired User Hazard Do not attempt to use or maintain 2.11 Training the attachment under the influence of drugs or alcohol. Consult your doctor before using Norden Mfg LLC follows the general Safety the attachment while taking prescription Standards specified by the Farm Equipment medications. Manufacturers Association (F.E.M.A.), and the American National Standards Institute (ANSI). -
Page 9: Authorization / Training Sign-Off Form
If you do not understand any information in this manual, see your dealer or contact Norden Mfg LLC before proceeding. Do not use or allow anyone else to use this attachment until all information has been reviewed. Annually review this manual before the season start- Make periodic reviews of SAFETY and OPERATION a standard practice. - Page 10 Authorization / Training Sign-Off Form Date User’s Signature Owner’s Signature Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets...
-
Page 11: Safety Decals And Labels
5. Replacement parts must have replacement decals attached before the attachment is used. 6. Decals are available from your authorized dealer or from Norden Mfg LLC at no charge. Euro Loader Buckets Norden Mfg. LLC (877) 296-5851... -
Page 12: Safety Sign Locations
Coupler Handles - Locked Handle Locked Lockpins must completely engage attachment plate slots. Lockpin Extended 1027140 WARNING — Pin Engagement INFORMATIONAL — Read the Manual WARNING — No Riders Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets... -
Page 13: Nomenclature
4. Nomenclature Item Description Loader Bucket Cutting Edge Attachment Eyes Attachment Hooks Euro Loader Buckets Norden Mfg. LLC (877) 296-5851... -
Page 14: Assembly And Setup
The loader bucket comes fully assembled from the factory. NOTICE Confirm Proper Ballast For light weight utility tractors, consult the Tractor Operator’s Manual to determine if rear ballast is required for heavy loads to maintain steering control. Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets... -
Page 15: Usage
This section is provided to give the operator general safety information for the machine. Always follow the Never allow children to use the attachment. OEM instructions given in the operator’s manual for the machine. Euro Loader Buckets Norden Mfg. LLC (877) 296-5851... -
Page 16: Attaching To Machine
10. Raise the loader arms until the tool carrier is clearly visible from the driver’s cab. Inspect 3. Drive the machine forwards slowly, centering alignment and verify positioning. the carrier arms between the hooks on the attachment. Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets... -
Page 17: Pre-Operation Checklist
Operation Sections of the machine operator’s manual. It is important to note that these manuals must be read and explained to any operator who cannot read. It is crucial to never allow anyone to operate the machine or use the attachment without complete operating instructions. Euro Loader Buckets Norden Mfg. LLC (877) 296-5851... -
Page 18: Picking Up A Load
Carefully approach the loading area, attachment as a working platform. ensuring no objects will come back into Do not lift or transport people using the loader the operator’s space, causing serious or attachment. injury or death. Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets... -
Page 19: Traveling With A Load
7. When traveling over ramps or inclines, keep the load on the “uphill” side of the machine. 8. Whenever possible, travel straight on grades, Euro Loader Buckets Norden Mfg. LLC (877) 296-5851... -
Page 20: Detaching From Machine
7. Make sure the area is clear of bystanders and animals, then slowly back the machine away from the attachment, ensuring that the tool carrier does not interfere with the attachment. Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets... -
Page 21: Transporting
Plan your route to avoid heavy traffic. Travel on roadways in such a way that faster moving vehicles can pass safely. Euro Loader Buckets Norden Mfg. LLC (877) 296-5851... -
Page 22: Contents 8.1 Placing In Storage
Machine” on page 20. 8.2 Removing from Storage 1. Attach the attachment to the machine following the procedure in section “6.3 Attaching to Machine” on page 16. 2. Before placing the attachment back into service, replace any worn or defective parts and perform the “6.4 Pre-Operation Checklist” on page 17. Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets... -
Page 23: Maintenance
Crush Hazard attachment life and is an invitation for problems. Always set the attachment on blocks or on Norden Mfg LLC will not claim responsibility for use the ground when performing maintenance. of unapproved parts and/or accessories and other damages as a result of their use. -
Page 24: Welding Repairs
9.3 Welding Repairs Before performing any type of welding repair to the attachment, contact Norden Mfg LLC for approval. Repair welding must be done with care and with procedures that may be beyond the capabilities of the ordinary welder. WARNING... -
Page 25: Parts Section
10. Parts Section 10.1 Ordering Parts Norden Mfg LLC manufactures a quality product that requires very little maintenance or repair. However, should a part break or become damaged, our knowledgeable staff can make sure you receive the part(s) to put your attachment back into operation. 10.2 Contact Information... -
Page 26: Eb Parts Detail
Part number Name Euro Bucket Weldment Black 1014760 Norden Logo 1" 1027180 Decal - Manufacturing Small 1028640 Decal - Falling Hazard 1028630 Decal - Warning No Riders 1024330 Decal - Read Manual 1027460 Data Plate Norden Mfg. LLC (877) 296-5851 Euro Loader Buckets... - Page 27 Fun Fact: Books like this are sized in multiples of four pages. This is because a single piece of 11” x 17” paper yields four sides of 8 1/2” x 11” paper. Euro Loader Buckets Norden Mfg. LLC (877) 296-5851...
- Page 28 Norden Mfg LLC 4210 Kinsman Rd NW North Bloomfield, OH 44450 www.nordenmfg.com (877) 296-5851 support@nordenmfg.com 102110 Rev. A Revised 06-2023...