Page 1
Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com UH18 Extends 18G HDMI (4K @60Hz 4:4:4) and USB 2.0 to 100 meters USER MANUAL December 8, 2023 Hall Technologies December 8, 2023 Page 1 of 13...
Page 2
8. Protect the power cord from being walked on or pinched particularly at plugs. 9. Only use attachments / accessories specified by the manufacturer. Refer all servicing to qualified service personnel. Hall Technologies December 8, 2023 Page 2 of 13...
Introduction OVERVIEW The UH18 extends HDMI Video and USB 2.0 on a single CAT6 cable to 100 meters or more. The extender kit consists of a Sender (UH18-S) and Receiver (UH18-R). Power, USB, RS-232 and IR (remote) extend on the same cable. The power supply connects to either side of the extender.
Only one power supply needed (power is sent over UTP cable to other side) • Perfect for Server Rooms with local and remote access to the PCs • Works with KVM Switches and KVM Consoles • Hall Technologies December 8, 2023 Page 5 of 13...
Package Contents UH18-S 1x Model UH18-S Sender 2x Side Brackets with screws for surface mounting 2x 3-pin terminal strip for RS-232 1x IR Emitter cable (can be used on Sender or Receiver) 1x USB Type A to Type B cable...
If you need to connect any local USB devices such as a keyboard, mouse or KVM Switch; • the UH18-S provides two USB ports for this purpose. This is useful particularly if your PC or laptop has a limited number of USB ports.
Connect any speakers or audio equipment to the de-embedded HDMI audio outputs on the • Receiver. Connectors & Indicators UH18-S Front and Back IR In Connects to the IR Detector Cable IR Out Connects to the IR Emitter Cable USB Hub Connects to any USB 2.0 local devices USB 2.0 Connects to computer with USB 2.0 Type A to B Cable...
UH18-R Front and Back IR In Connects to the IR Detector Cable IR Out Connects to the IR Emitter Cable USB Hub Connects to any USB 2.0 remote devices Long Reach OFF (default) – Extend video to 100m including 4K ON –Extend video to 150m up to 1080p...
Functions EDID Management The UH18-S Sender can pass either the Local or Remote EDID to the video source. To pass the remote EDID of the display connected to the HDMI Output of the Receiver, turn the Local EDID DIP switch on the front panel OFF. This is the default mode.
Note: The above images are representative; the actual cable may look different RS-232 Extension The RS-232 Extension in UH18 is pass-through and works up to 115K baud. The baud rate settings of the serial device connected at the Sender must match with the serial device connected at the Receiver end for successful fullduplex communication.
6.87” (172.4 mm) W × 4.45” (113.2 mm) D × 0.95” (24 mm) H All protrusions Dimensions included Product Weight 1.3 Lbs Shipping Weight Type 5.2 Lbs (Sender + Receiver) Safety EMI/EMC CE, FCC Class A MTBF 90,000 hours (estimate) Warranty 3 years parts and labor Hall Technologies December 8, 2023 Page 12 of 13...