Advertisement
Function for service
|
:
ere
Press the RESET button of the projector or the TIMER
Displayed the operating time of the lamp
button of the remote control, for 3 seconds.
Press the RESET button of the projector or the remote
Reset the operating time of the lamp
control MENU, for 3 seconds.
(During be displayed the operating time of the lamp.)
Press the MUTE button of the projector or the remote
Displayed the operating time of the projector
control, for 3 seconds.
(During be displayed the operating time of the lamp.)
When replacing the lamp, Reset the operating time of lamp.
Reset the lamp timer :
Please carry out the following operation within
10 minutes from power on, if you replaced the lamp after 2,000 hours.
2
3
OIBIOIO®
(1 )
@
pea
aduy
ay
O3GIA
C)
1) Press the RESET button on projector for 3 seconds or remote
control TIMER button for 3 seconds and display the total lamp
used time.
LAMP 1700 hr
2) Press the RESET button on projector or remote control MENU
ON button during displaying the lamp used time.
LAMP 1700 C0 CANCEL
3) Select the "0" on the screen using the MENU (@)) button or
DISK PAD.
ee
ee
a)
;
ViewSonic Corporation
—6—
|, Confidential - Do Not Copy
PJ860-2
Advertisement
